Collaborative Gaming Headset OEM
2.4GHz Wireless, Bluetooth 5.4 And 3.5mm Wired Gaming Headset Platform For Collaborative Audio Programs
HOG is a collaborative gaming headset project built around a tri-mode audio platform, detachable unidirectional microphone, 50mm driver, 800mAh protected battery and project-specific themed appearance details. The page presents the product as a collaborative OEM/ODM development example without expanding any licensing or exclusivity claims beyond the supplied files.
Model
HOG
MOQ
Project Dependent
Lead Time
Project Dependent After Artwork And Sample Review
HOG is a collaborative gaming headset project for buyers developing themed or co-branded gaming audio programs. The confirmed product identity is HOG, with a 2.4GHz wireless, Bluetooth 5.4 and 3.5mm wired connection architecture. It is categorized as a Collaborative gaming headset, not as a standard wireless or wired headset listing.
The engineering platform uses an ATS3031 headset chipset and an ATS3031 + PA transmitter chipset. The product specification confirms an 800mAh battery with NTC protection board, independent XT4056 + NTC charging chip, LP5300 over-voltage and over-current protection, USB-C charging, firmware upgrade support through USB connection and play-while-charging behavior.
The audio structure is built around a 50mm dynamic speaker platform and a detachable RF6027-C unidirectional microphone. The product specification lists approximately 20ms 2.4GHz latency, >10m wireless distance, around 18 hours of use with backlight on and around 40 hours with backlight off.
The project files also define appearance details for collaborative development, including Pantone color references, gold stitching, silicone logo parts, brown eco PU leather, blue leather and custom blue braided charging and audio cables. These details make HOG suitable for buyers planning IP-themed, co-branded or limited-edition gaming headset programs where appearance development and functional audio engineering must be coordinated together.
The HOG platform combines 2.4GHz wireless, Bluetooth 5.4 and 3.5mm wired audio so a collaborative headset project can cover PC, console, mobile and wired-use requirements according to the manual compatibility table.
The technical files define themed graphics, Pantone color references, gold stitching, silicone logo parts, blue leather, brown eco PU leather and customized cable colors for a coordinated collaborative product direction.
The supplied project specification includes a blue Pantone 7546C transmitter with gold Pantone 7562C logo printing, a custom charging cable and a custom audio cable.
The headset keeps the collaborative appearance while retaining a 50mm driver, detachable unidirectional microphone, USB-C charging and mode-switching behavior for actual gaming use.
The technology specification states that color box, inner card, manual, brochure, carton and seal materials are provided by the customer, allowing packaging visuals to stay aligned with the collaboration program.
The files list multiple certification support requirements and state that MACH provides samples and required materials while the customer arranges certification work, so the page does not claim completed certification status.
2.4GHz wireless, Bluetooth 5.4 and 3.5mm wired connection modes
ATS3031 headset chipset with ATS3031 + PA transmitter chipset
800mAh battery with NTC protection board
Approximately 18h use time with backlight on and 40h with backlight off
Approximately 20ms 2.4GHz latency and >10m wireless distance
50mm dynamic speaker with 20Hz-20kHz frequency response
RF6027-C detachable unidirectional microphone with -42dB +/-3dB sensitivity
Orange LED backlight, default on, with key-controlled on/off function
USB-C charging, play while charging and USB firmware upgrade support
Custom themed ear cup artwork, stitching, Pantone color and dongle appearance details
The following parameters are taken from the HOG Product Card, product specification table, technology specification PDF, speaker specification, microphone specification and user manual.
Model
HOG
Product Category
Collaborative gaming headsets
Project Type
Collaborative / co-developed gaming headset project based on supplied artwork and product requirements
Connection Modes
2.4GHz wireless, Bluetooth 5.4 and 3.5mm wired analog audio
Default Power-On Mode
2.4GHz mode
Bluetooth Pairing Name
Lexip X Hogwarts
Headset Chipset
ATS3031
Transmitter Chipset
ATS3031 + PA
Charging Chip
XT4056 + NTC
Protection Chip
LP5300 OVP/OCP protection
Battery Capacity
800mAh with NTC protection board
Charging Current
<=450mA
Charging Time
Approximately 2 hours
Operating Time
Approximately 18h with backlight on; approximately 40h with backlight off
Wireless Distance
>10m
2.4GHz Latency
Approximately 20ms
Headset Power Consumption
45mA, with variation depending on light and volume
Transmitter Power Consumption
25mA
Speaker Driver
50mm dynamic speaker, CY5016-045 platform
Speaker Impedance
16 ohm +/-15%
Speaker Sensitivity
116dB +/-3dB from speaker specification; 110dB +/-3dB listed in product specification table
Frequency Response
20Hz-20kHz
Microphone
RF6027-C unidirectional 6.0 x 2.7mm microphone
Microphone Sensitivity
-42dB +/-3dB
Microphone Output Impedance
2.2K ohm
Microphone S/N
65dB
LED
Orange LED always-on backlight; default on; key-controlled on/off
USB-C Port
Charging, play while charging and firmware upgrade support
Auto Power-Off
The headset powers off automatically after 5 minutes without use
Controls
Power on/off, volume +, volume -, microphone on/off, LED on/off, mode switching, re-pairing by pressing volume + and volume - together for 3 seconds
Indicator States
Power on and pairing: red/blue flashing; connected: blue solid; charging: red solid; fully charged: blue solid; power off: light off
Switch / Switch 2 Compatibility
3.5mm: audio and microphone, no volume control; dongle: audio, volume and microphone; Bluetooth: audio and volume, no microphone
PC / Mac Compatibility
3.5mm: audio and microphone, no volume control; dongle: audio, volume and microphone; Bluetooth: audio, volume and microphone
Android / iOS Compatibility
3.5mm: audio and microphone, no volume control; dongle: audio, volume and microphone; Bluetooth: audio, volume and microphone
PS5 / PS4 Compatibility
3.5mm: audio and microphone, no volume control; dongle: audio, volume and microphone; Bluetooth: not supported according to the manual table
Xbox Compatibility
3.5mm: audio and microphone, no volume control; dongle and Bluetooth: not supported according to the manual table
Supplied Accessories In Project Specification
Headset, detachable directional microphone, custom charging cable, custom audio cable and transmitter
Collaborative gaming headset projects
IP-themed gaming accessory development
Co-branded gaming headset programs
Limited-edition gaming audio programs
Console accessory brand projects
PC and Mac gaming headset lines
Private-label tri-mode gaming headset programs
Gaming peripheral distributor portfolios
Retail gaming accessory lines
HOG is a collaborative product development example where mechanical, visual, firmware and accessory details are coordinated around the buyer's approved artwork and project files.
Custom ear cup artwork and themed graphic integration from supplied project files
Logo printing and silicone logo part development in defined gold and blue colors
Pantone color matching including blue Pantone 7546C and gold Pantone 7562C references
Headband stitching and embroidery direction according to approved artwork
Brown eco PU leather and blue leather material direction from the technology specification
Custom transmitter color and logo printing
Custom braided USB to Type-C charging cable and Type-C to 3.5mm audio cable
Detachable directional microphone configuration
Orange LED backlight on/off control
USB firmware upgrade support
Bluetooth pairing name and voice prompt confirmation according to customer requirements
Packaging visual coordination when buyer provides box, insert, manual, brochure, carton and seal artwork
Gaming audio OEM/ODM project support from concept review to production execution
Wireless gaming headset platform integration covering 2.4GHz, Bluetooth and wired use cases
Project coordination for color, artwork, silicone parts, stitching, cables, dongle appearance and packaging alignment
Acoustic review with speaker and microphone component specifications
Reliability, aging, functional and final inspection support according to existing MACH manufacturing process
Certification sample and documentation support according to target market requirements
The Product Card and technology specification list certification support requirements. These references are treated as project requirements, not as completed certification claims. The technology specification states that MACH provides samples and related materials while the customer arranges certification work.
MACH supports collaborative gaming audio projects with controlled sampling, acoustic evaluation, reliability testing, packaging coordination and final inspection. This section uses HOG folder manufacturing images and existing MACH manufacturing capability language only.
Product artwork and engineering requirement review
Acoustic test room support
Reliability testing support
Aging and functional testing support
Packaging line coordination
Final inspection area support
HOG is a collaborative tri-mode gaming headset project. The files identify it as a 2.4GHz wireless, Bluetooth 5.4 and 3.5mm wired gaming headset with project-specific themed appearance development.
It is listed only under Collaborative gaming headsets. The category follows the Product Card selection and the current upload requirement.
Yes. The Product Card and specification table confirm 2.4GHz wireless, Bluetooth and 3.5mm jack support. The manual also shows Bluetooth, dongle 2.4GHz and wired usage paths.
The product specification lists ATS3031 for the headset and ATS3031 + PA for the transmitter.
The specification lists an 800mAh battery with NTC protection board, approximately 2 hours charging time, approximately 18 hours of use with backlight on and approximately 40 hours with backlight off.
The specification and microphone document identify a detachable RF6027-C unidirectional 6.0 x 2.7mm microphone with -42dB +/-3dB sensitivity.
The manual table lists support by mode. PC/Mac and Android/iOS support 3.5mm, dongle and Bluetooth. Switch/Switch 2 supports all three modes with Bluetooth microphone unavailable. PS5/PS4 support 3.5mm and dongle but not Bluetooth. Xbox supports 3.5mm audio and microphone only.
Yes, the supplied project files show custom ear cup graphics, Pantone color references, silicone logo parts, stitching, leather materials, dongle color and cable color directions. Final implementation depends on approved artwork and engineering review.
The technology specification states that the customer provides color box, inner card, manual, brochure, carton and seal materials. MACH can coordinate product and packaging execution according to the approved buyer materials.
MOQ depends on the selected platform, product configuration, artwork requirements and packaging customization. Please contact MACH for project evaluation.
No. The supplied files include collaborative artwork and legal text references, but this page does not claim official license status, exclusivity, commercial results.
The files list CE, FCC, RoHS, REACH, KC, UKCA, PSE, TELEC, BQB and additional requirements such as RED, CB Scheme, EN62368-1, WERCS and MSDS. These are treated as certification support requirements, not completed certification claims.
Send your target market, artwork status, platform requirements, expected quantity and packaging scope. MACH can evaluate the HOG tri-mode collaborative headset platform and provide project-specific RFQ guidance.
Product Specification Review
Artwork And CMF Review
Connection Mode Review
Packaging Scope Review
Certification Support Requirements
Project RFQ Evaluation
Use this HOG page as a reference for tri-mode collaborative headset development. MACH can review your artwork, color direction, connection requirements, accessory plan and compliance targets before quotation.
MACH supports gaming audio OEM/ODM projects that combine engineering requirements with private-label or collaborative appearance development.
For HOG, the available files show how chipset selection, connection modes, microphone structure, battery system, custom color references, silicone logo parts, cables, dongle appearance and packaging materials are coordinated in one development package.
MACH does not use this page to claim customer authorization, completed certification, commercial results or exclusivity. The page is limited to product information contained in the supplied HOG project folder.